Whether you’re a renter or homeowner, battling bathroom mold may be a must if you would like to stay the space clean, healthy, and safe then not to talk of the damage to walls and ceilings! Every bathroom will accumulate moisture that’s quite a given. But by reducing your moisture levels within the bathroom, you’ll prevent mold from appearing, or hamper mold growth if it’s already there. Keeping your bathroom mold-free is comparatively easy if you’re consistent in your cleaning and follow these easy tips and tricks to scale back the moisture levels within the room.
Get an honest Fan
Vents work by sucking the moisture out of the air and sending it outside. At first, you have to defend against moisture and mold. The CFM (Cubic Feet Per Minute) calculates your fan will tell you if it’s ok for the space. If it’s too small you can buy a more powerful one. To calculate the perfect strength for your fan, multiply the square footage of the space by 1.1 if your ceiling is 8ft or 1.5 for 9ft.
Love Your Squeegee
Sure, it is a little bit of an annoying task especially when you’re rushed within the morning, but bathroom squeegees exist for a reason. Taking a moment to run the squeegee on your tub or shower walls right after washing reduces the moisture within the room by up to 3/4.
That’s tons of dampness you’ll get obviate and tons of mold you’ll prevent.
Run the Fan Properly
It’s not enough to run the vent during your shower or bath. You should leave it on for a minimum of a half-hour after you’re done. This prevents leftover moisture from damaging the ceiling and walls from growing mold. In this way, you do not need to return to the toilet to show it off later.
Wash Rugs and Towels Regularly
The bath mat, bathroom rug, and towels are ideal mold growth spots especially if you allow them unwashed for long periods of your time. You can fight mold in your bathroom by scrubbing your towels and toilet rugs regularly at least once a week and together. Clean towels and rugs mean a cleaner and healthier bathroom.
Fix All the Leaks
Bathroom mold doesn’t just come from the water in your shower or bath. Leaks also can cause moisture to accumulate and mold to grow. Whenever you see a leak in the bathroom, just try to fix it directly or you can also call a plumber to do it for you. Avoiding the messy things will only make things worse, especially if mold takes hold and starts growing in your bathroom. It’s a lot harder to urge obviate mold than it is to stop it.
Don’t Let It Grow
As with every prevention method, you can avoid mold is to avoid the conditions where it grows in the first place. This suggests removing water and moisture out of the air and keeping fabrics clean, also avoiding water buildups.
Dry Out Your Shower Items
Here’s another one that’s counter-intuitive to tons of folks busy people, but still essential for keeping mold away: removing loofahs, sponges, and merchandise bottles from the shower when not in use. As they dry, water can accumulate under them, and that they become the right track for mold and mildew.
Conclusions
Combine 1 part of bleach with 2 parts water during a spray bottle and spread it into the affected area. Let the answer sit for 10 minutes. The mold should start to dissolve on its own, but if areas of stubborn mold remain, use a rough brush (for larger areas) or an old toothbrush (for smaller areas) to wash the mold away.
